Here are the steps to attach the Flame Boss® Temperature Probe Y-Cable to use and monitor multiple meat probes on the FB300 controller.


To monitor 3 meat probes:


1. Plug a FB Temp Probe Y-Cable into the pit jack on the bottom of the FB300 controller

2. Plug the pit probe into the black lead and a meat probe into the red lead

3. Plug a FB Temp Probe Y-Cable into the meat jack on the bottom of the FB300 controller

4. Plug a meat probe into the black and red leads

Note: The Pit and Meat 2 temps are read from the temp probes plugged into the pit jack. The Meat 1 and Meat 3 temps are read from the meat probes plugged into the meat jack. The temperature readings for all 3 meat probes are displayed in rotation on the FB300 display screen and all 3 readings display in the MyFlameBoss.com application.


To monitor 2 meat probes:


1. Plug a FB Temp Probe Y-Cable into the pit jack on the bottom of the FB300 controller

2. Plug the pit probe into the black lead and a meat probe into the red lead

3. Plug a meat probe into the meat jack

Note: The Pit and Meat 2 temps are read from the temp probes plugged into the pit jack. The Meat 1 temp is read from the meat probe plugged into the meat jack. The temperature readings for both meat probes are displayed in rotation on the FB300 display screen and both readings display in the MyFlameBoss.com application.


If you need further assistance, please click here to Contact Us or call us at 800-978-9078.