Here are the steps to attach the Flame Boss® Temperature Probe Y-Cable to use and monitor multiple meat probes on FB300 or EGG Genius controllers.


To monitor 3 meat probes:


1. Plug a Temp Probe Y-Cable into the pit jack on the bottom of the controller

2. Plug the pit probe into the black lead and a meat probe into the red lead

3. Plug a FB Temp Probe Y-Cable into the meat jack on the bottom of the controller

4. Plug a meat probe into the black and red leads

Note: The Pit and Meat 2 temps are read from the temp probes plugged into the pit jack. The Meat 1 and Meat 3 temps are read from the meat probes plugged into the meat jack. 


To monitor 2 meat probes:


1. Plug a FB Temp Probe Y-Cable into the pit jack on the bottom of the controller

2. Plug the pit probe into the black lead and a meat probe into the red lead

3. Plug a meat probe into the meat jack

Note: The Pit and Meat 2 temps are read from the temp probes plugged into the pit jack. The Meat 1 temp is read from the meat probe plugged into the meat jack.


If you need further assistance, please click here to Contact Us or call us at 800-978-9078.